View source for Not Behaving

=Behavior Issues=
==Problem==
Cutter Head tries to keep going once it reaches the Left or Right side.
==Solution==
This is probably related to the Limit Switches. Look for loose connections or otherwise damaged switches or wiring. 
==Problem==
When powered On the Light comes on but it beeps three times and halts, nothing displays on the screen. 
==Solution==
Possibly a Loose Keyboard Cable
==Problem==
Blade drags cutting where it's not supposed to and NOT cutting when it should.
==Solution==
The Vertical Limit switches are Leaf springs and these are probably binding. Carefully remove the cover of the cutter carriage and pinch the upper and lower Leaf springs together.
==Problem==
Mat not loading. The motors spin but don't suck in the Mat. (Experienced on [[Second Generation]] Hardware)
==Solution==
OPen the case and find the Large Cog and Small Cog on the side and confirm they are engaging with each other. Push them back together and use a little drop of glue (probably a super glue of some kind) to keep it in place. 
=References=
[http://everhack.blog.atxhackerspace.org/2012/02/08/cricut-repair-info/ everhack blog atxhackerspace]